1. PIPE (Extrusion molding)
1. We have many tool dies of pipes for extrusion molding.
2. We have plenty kinds of tools to apply for almost of all dia of pipes especially under dia 50mm.
3. As to material, We can manufacture pipes of PC, PMMA, PEN ,PVC and other plastic material.
4, We cut the pipe and make holes to adjust your request.
5. We accept trial molding.
2. M503 Wire protect part for dia 20 hole
Product No.: M503
Material: Polyethylene
Size: dia 26x7
Remarks: This product protect wires coming into lighting fixtures.
3. Pull Switch
Product No.: NZ1200A
Remarks
1. On-Off pull switch
2. We have many type of Pull Switches in our business line. This is one of them.
Please contact us.4. Water Proof Lighting unit
1. You can put this lighting unit into your lighting fixture which you design by your self.
2. IP65 (Please test and confirm your lighting fixture by you.)
3. We have two types; dia 55mm and 75mm.
4. You canuse AC power.
5. We have narrow angle, medium angle and wide angle versions.
| ６００ｌｍ | １０００ｌｍ | １６００ｌｍ | |
| Input Voltage | ＡＣ１００∨ | ||
| ＡＣ２００～２４２∨ | |||
| Power consumpotion | 9.0Ｗ | 15.6Ｗ | 24.8Ｗ |
| Light flux（3000K/Ra85） | 600 | 1000 | 1600 |
| range | narrow（15）midium（20）wide（40） | ||
| Color renddering | Ra83（TYP）但し、5000KのみRa70） | ||
| Color tem. | 3000K/4000K/5000K | ||
| dimmer | Non | ||
| How to fix | screw | ||
| Water proof | IP65 | ||
| Service circumstance. | Tepmp.：-20～35℃ Humidity：0～85％ | ||
| size | φ55XH70ｍｍ | φ75XH55ｍｍ | |
5. M598 Push to fix part
Product No.: M589
Material: SUS Silicon rubber
Size: dia 8x7
Remarks
1. You can fix PCB by this products without nuts, bolts, screws.
The only thing to fix is to push M598.
2. We supply the tool for M598.
6. Other lighting parts
Product No.: M505 Washer M506 Washer M507 Washer
Material: Nylon
Size: dia 10X3, dia 12x3, dia 14x3
Remarks:
1. This product is for washer.
2. This product keeps with bolt. So you do not lose the washer.
3. We have three tyapes. M505 is for dia 8 bolt, M506 for dia 10. M507 for dia 12
Product No.: M147
Material: Iron, sus the head is PP plastic.
Size : The head is from dia 8 to dia 20.
There are many lengths of screw.
Product No.: M508
Material: Nylon
Size : The head is from dia 8 to dia 20.
There are many lengths of screw.
Remarks: this product keeps wire away from glass of lighting fixture.7. LED lamp for cooking appliance (for steam convection oven lamp)
Product No.： MSTL-1 (for steam convection oven)
Material body： Aluminum
Cover: Glass
Size: 130x34x15
Wire: 0.35mm2 PVC
Max temperature: Tc point 100°C
Remarks:
1. Very easy to install. Only one bolt is necessary.
2. Covered by glass.
3. Body of lamp is made by Aluminum to radiate heat efficiently.
Product No.： MSTL-2 (for steam convection oven)
Material body： Aluminum
Cover: Glass
Size: 230x34x15
Wire: 0.35mm2 PVC
Max temperature: Tc point 100°C
Remarks:
1. Very easy to install. Only one bolt is necessary.
2. Covered by glass.
3. Body of lamp is made by Aluminum to radiate heat efficiently.
8. LED lamp for oven
Product No.： Under development (for oven)
Cover: Glass
Size: 32x15
Product No.： Under development (for oven)
Cover: Glass
Size: dia 42x27
roduct No.： Under development (for oven)
Cover: Glass
Size: dia 70
9. Injection Molding Design by 3D CAD
We have been designing lighting fixtures by 3D CAD for 35 years by ourselves.
We are using NX (I-DEAS) as 3D CAD software.
And also we have been using Moldflow to analyse the flow of palastic products for 35 years by ourselves.
We can design not only plastic but also metal products.
Please contact us. We will help you to make your dream come true.
10. ANALYSIS by Moldflow
we have been using Moldflow to analyse the flow of palastic products for 35 years by ourselves.
We analyse the flow of plastic in the tool to manufacture high quality products at the stage of designing.
Please contact us. We will help you to make your dream come true.
Fulfil analysis
Weld-line analisis
